Home » Audio » Swap Meet » Any interest in 4 Pi Cabinets, Horns, DE250 Clones and single JBL 2226H Driver
Any interest in 4 Pi Cabinets, Horns, DE250 Clones and single JBL 2226H Driver [message #92539] Fri, 30 October 2020 22:29 Go to next message
dkalsi is currently offline  dkalsi
Messages: 5
Registered: July 2015
Esquire
(Wash DC-Metro Area Only)

Hi All,

I'm looking to sell a partially complete 4 Pi Build.

I've abandoned the project mid-way. I was building a set for my parents, as I got closer to completion, my brother ended up gifting the pair that I gifted him to my parents instead.

I was contemplating completing the project, but it hit a snag. One of my JBL 2226H driver "buzzes" at low frequency (120hz and less). It may be the dust cap, it may be the coil. Don't know, but I don't plan on sinking any more money into the project.

I currently have the following:

Pair - 4Pi Cabinets - built with 18mm Baltic Birch Plywood - the enclosures were built taller and the horns were centered for aesthetic purposes. No standing wave issues with the tall cabinet - this was verified via impedance sweep and close mic measurements. The enclosures were heavily braced and were finished with water-based poly.

Pair - Wayne 4pi Horns

Pair - Denovo DNA-360 compression drivers (apparently a direct clone of the DE250)

Pair - JBL 2226H drivers, one works flawlessly, the other has a buzz at low frequency.

Not sure what is a fair price, but I was thinking $400 for all of the above?


/forum/index.php?t=getfile&id=2648&private=0


/forum/index.php?t=getfile&id=2647&private=0


/forum/index.php?t=getfile&id=2646&private=0


/forum/index.php?t=getfile&id=2645&private=0
  • Attachment: 5.jpg
    (Size: 249.70KB, Downloaded 60 times)
  • Attachment: 4.jpg
    (Size: 246.18KB, Downloaded 67 times)
  • Attachment: 3.jpg
    (Size: 243.42KB, Downloaded 66 times)
  • Attachment: 2.jpg
    (Size: 291.31KB, Downloaded 74 times)
Re: Any interest in 4 Pi Cabinets, Horns, DE250 Clones and single JBL 2226H Driver [message #92541 is a reply to message #92539] Sat, 31 October 2020 11:26 Go to previous messageGo to next message
Rusty is currently offline  Rusty
Messages: 432
Registered: May 2018
Location: Kansas City Missouri
Illuminati (1st Degree)
I don't think you'll have any trouble selling those. And for a very fair price. I just wanted to compliment your woodworking skills which are exemplary. Also, I wanted to ask you, where did you get your felt type sheets? Someone's going to get a heck of a deal your offering.
Re: Any interest in 4 Pi Cabinets, Horns, DE250 Clones and single JBL 2226H Driver [message #92544 is a reply to message #92541] Sat, 31 October 2020 13:57 Go to previous messageGo to next message
dkalsi is currently offline  dkalsi
Messages: 5
Registered: July 2015
Esquire
Thanks for the kind words, Rusty.

The felt type sheets are very similar to denim insulation, which seems to have become very popular in the DIY community. This insulation I used was obtained from my neighbor, who receives food delivery (Purple Carrot) in containers insulated with such material. I've used it on my subwoofer/speaker builds with great success, and frankly, I think it's even better than the denim insulation more commonly used.
Re: Any interest in 4 Pi Cabinets, Horns, DE250 Clones and single JBL 2226H Driver [message #92547 is a reply to message #92544] Sun, 01 November 2020 13:00 Go to previous message
Barryso is currently offline  Barryso
Messages: 125
Registered: May 2009
Master
Those are very nice. If I didn't already have a pair of 4 pi's it would be a no brainer.

Good luck with the sale and to whomever is the lucky purchaser.
Previous Topic: Martin DeWulf Passing
Goto Forum:
  


Current Time: Fri Dec 04 07:43:45 CST 2020

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest