Home » Audio » Group Build » Red & Green 5 mm LED (Graphs - Uf / If / rD.)
Red & Green 5 mm LED [message #87823] Sun, 15 April 2018 14:04
FL152  is currently offline FL152
Messages: 29
Registered: April 2011
Chancellor
NOS Siemens LR5360-DG standard diffused 5 mm red LED measured / calculated values (If = 10 mA) :

If = 10 mA, Uf = 1,605 V , rD = 3,54 Ω


index.php?t=getfile&id=2077&private=0
Figure 1: Forward voltage Uf against applied current If for 5 mm red LED LR5360-DG


index.php?t=getfile&id=2078&private=0
Figure 2: Dynamic resistance rD vs. applied current If for 5 mm red LED LR5360-DG


Cheap "no name" 5 mm standard diffused green LED measured / calculated values (If = 10 mA) :

If = 10 mA , Uf = 1,98 V , rD = 10,05 Ω


index.php?t=getfile&id=2079&private=0
Figure 3: Forward voltage Uf against applied current If for green "no name" 5 mm LED


index.php?t=getfile&id=2080&private=0
Figure 4: Dynamic resistance rD vs. applied current for green "no name" 5 mm LED


Measured and calculated values are pretty in line with previously published values for similar LEDs, see for example „Valve Amplifiers 4" by M. Jones, pages 44-45.

  • Attachment: graf4.tif
    (Size: 69.61KB, Downloaded 826 time(s))

  • Attachment: graf5.tif
    (Size: 39.99KB, Downloaded 817 time(s))

  • Attachment: graf6.tif
    (Size: 54.72KB, Downloaded 826 time(s))

  • Attachment: graf7.tif
    (Size: 43.54KB, Downloaded 815 time(s))

Previous Topic:HLMP-1700 low current 3 mm red LED
Next Topic:Preamp schematic check
Goto Forum:
  


Current Time: Tue Aug 14 22:43:34 CDT 2018

Sponsoring Organizations

AudioKinesis
AudioKinesis
BuildAnAmp.com
BuildAnAmp.com
Crescendo Systems
Crescendo Systems
DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com
Lone Star Audiofest