AudioRoundTable.com: Speaker

Home » Audio » Speaker » Flanking subs

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Flanking subs [message #81429]

Thu, 02 July 2015 05:22

johnnycamp5
Messages: 354
Registered: June 2015
Location: NJ

Grand Master

I'd like to use "flanking subs" for the 4pi's I'm building.
I already own/built one of these-

Scan-Speak Discovery 30W 12" Subwoofer Kit with Passive Radiator

Does this seem like a good sub to go with the 4 pi's, or must I use the 3 pi subs?
It would be easy enough for me to buy/build one more.

Report message to a moderator

Re: Flanking subs [message #81431 is a reply to message #81429]

Thu, 02 July 2015 10:30

Wayne Parham
Messages: 18676
Registered: January 2001

Illuminati (33rd Degree)

Those will probably work fine. The requirements of a sub are pretty simple - It's just gotta be powerful and clean.

Be sure and search the forums here for flanking sub crossover possibilities.

Sounds like you're going to have an excellent system!

Report message to a moderator

Re: Flanking subs [message #81726 is a reply to message #81429]

Wed, 09 December 2015 19:42

johnnycamp5
Messages: 354
Registered: June 2015
Location: NJ

Grand Master

So I've decided not to build another passive radiator sub, like the one I own/describe above, to use in a flaking sub config.

Instead, I'd like to build two, 3pi subs, and I'm starting to put some more thought into how I'm going to hook them up once built.

I'd like to use my upgraded Adcom 555 ss amp to power them up, so I must decide on a crossover/attenuator.

Has anyone used the RCA inline filters?
It looks like they use a 12db slope, and are available in 50, 80, and in the case of flanking subs, 100 and 120Hz low pass.

Regards!

Report message to a moderator

Previous Topic:	Johnny5's four Pi build
Next Topic:	iPod speakers

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Apr 20 03:13:02 CDT 2024