AudioRoundTable.com: Pi Speakers » Terminal Connectors

Home » Sponsored » Pi Speakers » Terminal Connectors

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Terminal Connectors [message #68669]

Thu, 21 July 2011 09:42

dutchswan0311
Messages: 102
Registered: June 2011
Location: Iowa

Viscount

I am building three 4pi and eight 1pi speakers. Does anyone see any issues with the use of this terminal connector instead of using binding posts?

Report message to a moderator

Re: Terminal Connectors [message #68671 is a reply to message #68669]

Thu, 21 July 2011 13:41

Wayne Parham
Messages: 18677
Registered: January 2001

Illuminati (33rd Degree)

I've used those kind before and they're OK but kind of cheesy. The spring and plastic activator pop out pretty easily.

Report message to a moderator

Re: Terminal Connectors [message #68673 is a reply to message #68669]

Thu, 21 July 2011 19:12

Bill Epstein
Messages: 1088
Registered: May 2009
Location: Smoky Mts. USA

Illuminati (2nd Degree)

I've posted before that you can't do better than the Pomona Tellurium Copper binding posts, especially now that the Edison-Price are no more.

http://www.alliedelec.com/catalog/pf.aspx?FN=447.pdf

You want the Model 3770s at Allied. No nickel, no brass, and it's audible to me as I've A/B'd with the gold Daytons. I buy the $4 round plastic cup terminals from PE, remove the terminals and replace them with the Pomomnas, an exact fit.

Report message to a moderator

Re: Terminal Connectors [message #68675 is a reply to message #68669]

Fri, 22 July 2011 07:18

dutchswan0311
Messages: 102
Registered: June 2011
Location: Iowa

Viscount

I ended up purchasing the Neutrik NL2MP Speakon 2 Pole Panel Mount. Thoughts?

Report message to a moderator

Re: Terminal Connectors [message #68900 is a reply to message #68675]

Mon, 08 August 2011 05:29

Maxjr
Messages: 57
Registered: August 2011

Baron

I love speakons! I plan on using them on my 4 Pi build.

Report message to a moderator

Re: Terminal Connectors [message #68918 is a reply to message #68900]

Mon, 08 August 2011 12:27

Matts
Messages: 359
Registered: May 2009

Grand Master

I like the pure copper ones, as well, with no plating. I still have an extra set from Percy that I haven't used yet... Copper sounds the best, to me. I also take the stock ones out of the PE cup and "reinstall" the good copper ones. Sometimes takes a little hammering, but then they're in to stay. I use twisted OFC magnet wire inside, all connections soldered.

Report message to a moderator