Home » Sponsored » Pi Speakers » 4Pi crossover (crossover)
4Pi crossover [message #67468] Thu, 05 May 2011 22:51 Go to next message
biglaz is currently offline  biglaz
Messages: 32
Registered: May 2009
Location: Kentucky
Baron
Wayne, do you provide the crossover diagram for the 4 Pi speaker using the JBL 2226H and the Eminence 2002 8 ohm driver. If so could you send those to me.

Thanks,

Robert
Re: 4Pi crossover [message #67471 is a reply to message #67468] Fri, 06 May 2011 09:23 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18678
Registered: January 2001
Illuminati (33rd Degree)

I'd be happy to send plans for the four π speaker but if you just need the crossover schematic, you can see it below. The "generic" schematic (of the unpopulated circuit board) at the following link:

http://www.pispeakers.com/fourPi_schematic.gif

Previous Topic: Are 7 Pi's for me?
Next Topic: Back EMF?
Goto Forum:
  


Current Time: Sat Apr 27 12:42:15 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest