Home » Sponsored » Pi Speakers » 2 Pi port questions
2 Pi port questions [message #53483] Thu, 30 April 2009 13:42 Go to next message
RickH is currently offline  RickH
Messages: 7
Registered: May 2009
Esquire
I am going to have to make my 2 Pis from 3/4" material instead of 5/8" and understand adjusting dimensions +1/4" in all directions to maintain the proper cabinet volume. Regarding the port length, do I need to maintain the overall 1-7/8" port length or do I add 1/8" to the port length to maintain the same port length inside the box?

Also, am I correct in thinking the edge of the port cutout should begin 2" from the bottom and 2" from the edge of the assembled speaker cabinet face? Thanks

Re: 2 Pi port questions [message #53484 is a reply to message #53483] Thu, 30 April 2009 18:34 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18670
Registered: January 2001
Illuminati (33rd Degree)

Make the overall port length the same, 1-7/8". And yes, the edge of the port is 2" up and 2" in from the side. I like to make a stereo pair in mirror images, with one port on the left and the other on the right.


Previous Topic: older Pi 4's pair for sale
Next Topic: Floor bounce effects frm Four Pi?
Goto Forum:
  


Current Time: Thu Mar 28 20:02:15 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest