AudioRoundTable.com: Pi Speakers » Attenuation for Theatre-3

Home » Sponsored » Pi Speakers » Attenuation for Theatre-3

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Attenuation for Theatre-3 [message #49372]

Tue, 25 April 2006 13:56

GarMan
Messages: 960
Registered: May 2009

Illuminati (2nd Degree)

Hi Wayne,

Can you please let me know what attenuation the Theatre-3 uses in its compensation network?

thx,
Gar.

Report message to a moderator

Re: Attenuation for Theatre-3 [message #49374 is a reply to message #49372]

Tue, 25 April 2006 14:47

Wayne Parham
Messages: 18680
Registered: January 2001

Illuminati (33rd Degree)

The Theater three π uses R1 = 25Ω and R2 = 16Ω. Zobel capacitor C5 is 40μF.

Report message to a moderator

Re: Attenuation for Theatre-3 [message #49376 is a reply to message #49374]

Tue, 25 April 2006 21:03

GarMan
Messages: 960
Registered: May 2009

Illuminati (2nd Degree)

Wayne,

Thanks for the quick response. Another request.
I remember coming across a document you wrote where component values were given depending on crossover frequency and level of attenuation. Can you please direct me to it?

thx,
Gar.

Report message to a moderator

Re: Attenuation for Theatre-3 [message #49377 is a reply to message #49376]

Tue, 25 April 2006 21:12

Wayne Parham
Messages: 18680
Registered: January 2001

Illuminati (33rd Degree)

You may be talking about the crossover document that comes with the plans, or maybe the one that describes several different crossover types. The one that comes in the plans has a chart of values. The other is available here: