Home » Audio » General » Sherwood SEL 400 volume potentiometer
Sherwood SEL 400 volume potentiometer [message #26573] Sat, 26 August 2006 04:49 Go to next message
PeterC1 is currently offline  PeterC1
Messages: 1
Registered: May 2009
Esquire
Hallo,

Potentiometer on my vintage Sherwood SEL 400 (about 1973) integrated amplifier is broken, damaged-no way to repair. Potentiometer has three sections - two for stereo, plus one - last section for power on off swich. Theare is already loudness correction on the last 1/3 of full lenght. Nominal resistance is 50k Ohm, it is linear, otherway dimensions are quite ordinary one. (Theare is already label on potentiometer with marks: CTS, Type TV-TCC )

Bad news is that it is quite rearly to find such potentiometer those days in electronic shops. Almost unpossible

I would realy very appreciate every information or help to find that potentiometer.
(my e-mail is: peter.bergant@elektro-ljubljana.si)

Best regards, Peter

Re: Sherwood SEL 400 volume potentiometer [message #26574 is a reply to message #26573] Mon, 28 August 2006 10:06 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18682
Registered: January 2001
Illuminati (33rd Degree)

Check here, hopefully they'll have a part that will work for you:

Previous Topic: Ok, here are my thoughts on Peter Aczel and the Audio Critic Mag.
Next Topic: The Hardest Thing To Learn
Goto Forum:
  


Current Time: Fri May 03 13:37:09 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest