AudioRoundTable.com: Speaker » Has this technology been used?

Home » Audio » Speaker » Has this technology been used?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Has this technology been used? [message #18060]

Tue, 12 July 2005 11:10

adavis464
Messages: 64
Registered: May 2009

Viscount

http://patimg1.uspto.gov/.piw?docid=US005304746&SectionNum=1&IDKey=0670CF724F20&HomeUrl=http://patft.uspto.gov/netacgi/nph-Parser?u=/netahtml/srchnum.htm%2526Sect1=PTO1%2526Sect2=HITOFF%2526p=1%2526r=1%2526l=50%2526f=G%2526d=PALL%2526s1=5304746.WKU.%2526OS=PN/5304746%2526RS=PN/5304746

Report message to a moderator

Re: Has this technology been used? [message #18061 is a reply to message #18060]

Tue, 12 July 2005 18:51

Wayne Parham
Messages: 18695
Registered: January 2001

Illuminati (33rd Degree)

I've not seen it in production. I would expect something like this to modify cone breakup behavior, so the upper response could be tuned. But I don't see how IM distortion is improved unless bandwidth is reduced. I also don't think it would work on a horn because it is too small to be significant at the low frequencies where the horn is most reactive.

Report message to a moderator