Home » Sponsored » Pi Speakers » PSD 2002 modifications
Measurements [message #41884 is a reply to message #41879] Thu, 10 July 2003 22:11 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18791
Registered: January 2001
Illuminati (33rd Degree)

You might try Speaker Workshop a shot. You can download it free and it works with your PC soundcard. It even has an online support forum, so you might want to give it a go.

Re: and a good thought at that. [message #41886 is a reply to message #41883] Thu, 10 July 2003 22:38 Go to previous messageGo to next message
Adam is currently offline  Adam
Messages: 419
Registered: May 2009
Illuminati (1st Degree)
You wanna sell 'em? I need two.

Adam

Re: Measurements [message #41887 is a reply to message #41884] Thu, 10 July 2003 22:38 Go to previous messageGo to next message
Adam is currently offline  Adam
Messages: 419
Registered: May 2009
Illuminati (1st Degree)
Thanks dude.

I downloaded the program, I'll take a boo at it tomorrow... Dunno what kinda mic I'll have access to for my computer, tho.

Adam

Sorry, but I'm going to hang on to them... [message #41888 is a reply to message #41886] Thu, 10 July 2003 22:55 Go to previous messageGo to next message
ToFo is currently offline  ToFo
Messages: 219
Registered: May 2009
Master
...and maybe even mod them with the hot knife.
Thomas F.
Re: Mic for Measurements [message #41891 is a reply to message #41887] Fri, 11 July 2003 03:07 Go to previous messageGo to next message
wunhuanglo is currently offline  wunhuanglo
Messages: 912
Registered: May 2009
Illuminati (2nd Degree)
Check out the TruRTA web site. They have a list of mics and amp combos available at places like Guitar Center that will work well for $60-$100.
Re: Sorry, but I'm going to hang on to them... [message #41897 is a reply to message #41888] Fri, 11 July 2003 08:55 Go to previous messageGo to next message
Adam is currently offline  Adam
Messages: 419
Registered: May 2009
Illuminati (1st Degree)
Damn you.

:D

Adam

Re: Mic for Measurements [message #41905 is a reply to message #41891] Sat, 12 July 2003 09:34 Go to previous messageGo to next message
Chris R is currently offline  Chris R
Messages: 133
Registered: May 2009
Master
Can't find TruRTA in google. Do you have a URL?
Thx, Chris

Re: Mic for Measurements - SORRY! [message #41910 is a reply to message #41905] Sat, 12 July 2003 19:41 Go to previous message
wunhuanglo is currently offline  wunhuanglo
Messages: 912
Registered: May 2009
Illuminati (2nd Degree)
Behringer ECM8000 Omnidirectional Measurement Microphone

This microphone is generally available at music stores for around $40.00. It is an electret condenser type and requires phantom power (+15 to +48 VDC) from the preamp in order to operate. You will need a mic preamp that supplies phantom power in order to use the mic with your computer sound system. Based on the frequency response curve provided with the microphone the response appears to be within plus-or-minus 1 dB from 20 to 20 kHz.

Behringer UB802 Microphone Mixer

The UB802 has two microphone input channels with switchable 48 VDC phantom power as required by the ECM8000 microphone above. This unit is generally available for about $69 in music stores.

Behringer MX602 Microphone Mixer

The MX602 has two microphone input channels with switchable 48 VDC phantom power as required by the ECM8000 microphone above. This older mixer is still generally available for about $69 in music stores. (compare to the UB802 above)

Behringer SHARK DSP110 Multi-Function Microphone Preamp

Behringer’s DSP110 preamp is available for about $69.00 at music stores. It provides the phantom powering required by the EMC8000 microphone (above). This unit is much more than just a preamp as it includes a number of digital processing functions. Even with all the extra functions this is still one of the least expensive mic preamps available. The DSP110 is also available from the above Internet sources. The biggest problem you might have with this unit is turning off all the special features!

Rolls MP13 Mini Mic Preamp

This is a very basic single channel preamp that can supply 36 VDC of phantom power to professional grade balanced microphones such as the ECM8000 above. It has both balanced and unbalanced input as well as balanced and unbalanced outputs. A single control varies the gain from 6 dB to 50 dB. A push button switch turns the phantom power on and off. It typically costs about $89 in music stores

Audio Buddy, Dual Mic Preamp

The Audio Buddy is a two-channel mic preamp that costs about $85.00. It provides phantom power but the voltage is not specified and may be only 9 VDC. This may or may not be adequate to power the EMC8000 mic as the mic specifies a range from 15 to 48 VDC. We mention this preamp here only because so few inexpensive products are available.

Here are links to some Internet sources for the above items:

Lentines Music: http://www.lentines.com

8th Street Music: http://www.8thstreet.com

Musicians Friend: http://www.musiciansfriend.com

Previous Topic: super tweeter for Pi 4 T
Next Topic: JBL2226H+MAC40s+large room=Kick ass
Goto Forum:
  


Current Time: Sun Dec 01 06:26:01 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest