AudioRoundTable.com: Silicon Valley » plans for single frequency electronic crossover?

Home » Audio » Silicon Valley » plans for single frequency electronic crossover?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: plans for single frequency electronic crossover? [message #61244 is a reply to message #61242]

Tue, 20 October 2009 16:02

Wayne Parham
Messages: 18793
Registered: January 2001

Illuminati (33rd Degree)

That may very well do the trick. Being a digital device, it must have the ability at least internally, since a filter is implemented as an algorithm. Whether or not you have access to the programming language to tailor the filters is the question, I guess.

As for the S&L system, it's both software and hardware. What I'm suggesting is essentially a Spice engine that allowed you to build an active crossover by emulating passive components, using the Spice circuit description language. That's what the S&L system does, but it is used specifically for making measurements, for emulating a passive crossover. I think it would be nice to have a similar device, but designed to be used as an active crossover with high quality digital and analog chips so you could use it in the signal path and expect good quality sound.

Report message to a moderator

Re: plans for single frequency electronic crossover? [message #61246 is a reply to message #61244]

Tue, 20 October 2009 22:14

Marlboro
Messages: 403
Registered: May 2009

Illuminati (1st Degree)

Sounds like the kind of "put together" projects that were available in the Allied Radio Catalog back in the 1950's. I can still remember the smell of the paper. My uncle was a professor of electrical engineering at UMASS. He left some job where he was making $20000 a year in 1954 for GE in Philly, to take the assistant professorship at about $1900, in Amherst. He had all these catalogs to drool over, and later I used to drool over Heathkit.

Also sounds like the stuff my nuclear physicist son used to put together, though way more simple, of course.

Report message to a moderator