Home » Sponsored » Pi Speakers » JBL 2426/2370 cd compensation and crossover point
JBL 2426/2370 cd compensation and crossover point [message #49234] Sat, 01 April 2006 12:44 Go to next message
ccvogel is currently offline  ccvogel
Messages: 17
Registered: May 2009
Chancellor

The frequency response curve [see image URL] published by JBL for the 2426/2370 does not seem to exhibit the 6 dB/octave decline that has been described in other posts as typical of CDs. Is CD compensation required for this combo?

Also, what range of crossover frequencies works best with the 2426/2370 when crossed over to a JBL 2226 in a 3.0 cu ft cabinet tuned to 40 Hz? I'm thinking that the 1600 Hz point in the Four-pi might be an accommodation for the H290 Horn???

Thanks,
ccvogel

Re: JBL 2426/2370 cd compensation and crossover point [message #49253 is a reply to message #49234] Mon, 03 April 2006 10:10 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18786
Registered: January 2001
Illuminati (33rd Degree)

Measure the 2426/2370 combo and see what you come up with.


Will do; thanks [message #49254 is a reply to message #49253] Mon, 03 April 2006 14:00 Go to previous message
ccvogel is currently offline  ccvogel
Messages: 17
Registered: May 2009
Chancellor


Previous Topic: Top port?
Next Topic: speaker recommendation
Goto Forum:
  


Current Time: Wed Nov 27 06:38:45 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest