Home » Sponsored » Pi Speakers » Cross Over Question
Cross Over Question [message #48551] Sat, 07 January 2006 16:12 Go to next message
HaknHendrix is currently offline  HaknHendrix
Messages: 25
Registered: May 2009
Chancellor
Here goes...

Situation:
I picked up a pair of JBL 2446J (160hm) compression drives with horns.

Current Configuration:
I have 4 Pi Towers (LaPaier's, 6.5 cubic ft), loaded with Eminence 15" Delta Pros and PSD2002 and an Eminence/PI 2-way 1.6KHz crossover. The 4 Pi's sound excellent!

Picked up the 2446J's because I'm infected with the audio diy virus.

Short Term Goal:
What crossover modifications would I have to make to simply connect the JBL 2446J in place of the PSD2002s. Would I to hear and compare.

Mid Term Goal:
Build a crossover - crossed over at perhaps 500Hz - 800Hz? This would be a better frequency for the JBL 2446J.

Please advise, or suggest a more rational approach.

thanks
Jim



Re: Cross Over Question [message #48552 is a reply to message #48551] Sat, 07 January 2006 21:35 Go to previous message
Wayne Parham is currently online  Wayne Parham
Messages: 18786
Registered: January 2001
Illuminati (33rd Degree)

There are 500Hz, 800Hz, 1kHz, 1.2kHz and 1.6kHz two-way crossovers with top-octave compensation on the π crossover schematic document and also in the Spice distribution. You might check them out and see which one you liked best. I think you'll find at least one of them will work very well for you.


Previous Topic: new studio two towers
Next Topic: 500 Hz mid-horn search
Goto Forum:
  


Current Time: Wed Nov 27 08:26:34 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest