Home » Sponsored » Pi Speakers » Speaker Question
Speaker Question [message #48464] Mon, 26 December 2005 05:25 Go to next message
Andy is currently offline  Andy
Messages: 6
Registered: May 2009
Esquire
Hi all!

I am currently a Magnepan owner, but would like to build a pair of speakers for use exclusively with an amp I have on hand. (An older Golden Tube SE40) The amp is rated about 40 watts per channel, but I have heard it is realistically around 25 at 8 ohms. This site has been recommended to me and I hope someone can guide me in making the proper choice. I have the ability to do carpentry work and am handy with a soldering iron. I dont have any size restrictions.
TIA,
Andy

Re: Speaker Question [message #48466 is a reply to message #48464] Mon, 26 December 2005 14:53 Go to previous message
Matts is currently offline  Matts
Messages: 359
Registered: May 2009
Grand Master
With that amp, you should have no problem with any of the Pi speakers. Your amp would have different outputs at different degrees of distortion, but 25watts would be plenty. After that, if you have corners with about 3' on each wall available, Wayne always recommends the corner horns, 7 series, and they are all great value if you build them yourself. I'm listening to Stage 4's now really enjoy them.

Previous Topic: Music for demo'ing Towers for Xmas
Next Topic: Studio 2 pi kit, 3 questions before I get started….
Goto Forum:
  


Current Time: Wed Nov 06 05:22:41 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest