AudioRoundTable.com: Pi Speakers » Different seven pi

Home » Sponsored » Pi Speakers » Different seven pi

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Different seven pi [message #46688]

Sun, 10 April 2005 17:07

Guardian
Messages: 5
Registered: May 2009

Esquire

Hello,

Just a little question here... My wife don't like the look of the corner horn and I don't want to lose the mid driver option...

Do you think it is possible to mount a seven pi kit in a single box without mid horn and still have great sounding loudspeakers??

What about the size, port and crossover (timing), will everything stay the same??

Thank you!
Michael

Report message to a moderator

Re: Different seven pi [message #46689 is a reply to message #46688]

Sun, 10 April 2005 17:08

Guardian
Messages: 5
Registered: May 2009

Esquire

Uhhh... Sorry.... By "without mid horn" I mean : the driver will still be there, but not the horn!

Report message to a moderator

Re: Different seven pi [message #46691 is a reply to message #46689]

Sun, 10 April 2005 20:04

Wayne Parham
Messages: 18783
Registered: January 2001

Illuminati (33rd Degree)

I've made several that way, and they sound very nice. But I think the current version looks and sounds the best.

Report message to a moderator

Re: Different seven pi [message #46692 is a reply to message #46691]

Mon, 11 April 2005 08:14

Guardian
Messages: 5
Registered: May 2009

Esquire

Does the crossover stay the same??

Report message to a moderator

Re: Different seven pi [message #46693 is a reply to message #46692]

Mon, 11 April 2005 08:50

Wayne Parham
Messages: 18783
Registered: January 2001

Illuminati (33rd Degree)

The crossover is different, but not much. The midhorn runs low enough that it's setup like a two-way with a sub.

Report message to a moderator

Re: Different seven pi [message #46744 is a reply to message #46693]

Thu, 21 April 2005 13:45

Spinjack
Messages: 100
Registered: May 2009

Viscount

Actually, this might be a solution that would work for me. What would be the chamber volume required for the midrange?

Report message to a moderator

Re: Different seven pi [message #46746 is a reply to message #46744]

Thu, 21 April 2005 15:53

Wayne Parham
Messages: 18783
Registered: January 2001

Illuminati (33rd Degree)

It's designed to have an open back, or an arbitrarily large rear chamber. The lower limit is the rear chamber must be larger than 0.5ft3.

Report message to a moderator

Previous Topic:	2 Pi port tuning
Next Topic:	The Royal on the way to Tulsa

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 06 09:23:59 CST 2024