AudioRoundTable.com: Pi Speakers » can the 2445J use in the pro 4 instead of the 2426?

Home » Sponsored » Pi Speakers » can the 2445J use in the pro 4 instead of the 2426?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

can the 2445J use in the pro 4 instead of the 2426? [message #43870]

Thu, 05 February 2004 10:06

Zeno
Messages: 122
Registered: May 2009

Master

hi wayne,

i understand that the 2445J is 16 ohm, can i really use them with a 8 ohm woofer in a two way?

thanks

Report message to a moderator

Re: can the 2445J use in the pro 4 instead of the 2426? [message #43871 is a reply to message #43870]

Thu, 05 February 2004 11:42

Wayne Parham
Messages: 18792
Registered: January 2001

Illuminati (33rd Degree)

Certainly, the 2445 can be used, but it is a 2" exit compression driver, so it isn't a direct replacement for the 2426. You'll need a different horn flare, but it will work just fine. You'll have more crossover options since you can run the HF horn lower but it won't have quite as high frequency extension using the larger device.

About 16 ohm drivers, there is some re-work of the 8 ohm version of the crossover necessary (obviously) but it isn't nearly as much as I would have thought. Check out the post called "16 ohm vs 8 ohm drivers"

Report message to a moderator

Previous Topic:	I have a 2500 LP collection for trade/sale
Next Topic:	BMS compression drivers and Pi ?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Dec 02 20:06:44 CST 2024