| Eminence X-over for 4Pi [message #42987] |
Tue, 11 November 2003 07:01  |
Chris R
Messages: 133
Registered: May 2009
|
Master |
|
|
Hi Wayne,
I've seen you recommend these as an economical way to get
the base X-over, then add the attenuator and HF comp. I'm
all hooked up with spice so I can view the effects of the
attenuator on x-over freq, except that I don't have the
schematics from Eminence to plug into the spice model.
Is that available?
Thx, Chris
|
|
|
|
| Re: Eminence X-over for 4Pi [message #42989 is a reply to message #42987] |
Tue, 11 November 2003 07:56  |
 |
Wayne Parham
Messages: 18791
Registered: January 2001
|
Illuminati (33rd Degree) |
|
|
Components L1, L2, C2, C3 and C4 are on the Eminence crossover PCB, which are sourced by, and which use the same component values as the corresponding π Speakers 500Hz, 800Hz and 1.6kHz crosssovers. The 600Hz and 250Hz/1.6kHz units are also sourced by Eminence, but are special order items, available only through π Speakers.But for your application - the π 1K6a010dB crossover used in your four π's - It can be made using the Eminence PXB2-1K6 PCB, adding a compensation cable assembly for the tweeter and Zobel damper for the woofer. There are some photos of these addition cable assmblies in the post called "Compensation networks - Photos." And the Spice model for the crossover can be found in the distribution of Spice available here, on the π Speakers website.
|
|
|
|
|
|
|
|
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
