AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Hornresp MMD spec

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Hornresp MMD spec [message #40736]

Thu, 27 March 2003 01:54

Adrian Mack
Messages: 568
Registered: May 2009

Illuminati (1st Degree)

Hey everyone.

Am using Hornresp now, and it needs something called Mmd. Is this the same as Mms? If not, how can I calculate Mmd from the other t/s specs?

Thanks!
Adrian

Report message to a moderator

Re: Hornresp MMD spec [message #40738 is a reply to message #40736]

Thu, 27 March 2003 11:23

Smrtislav
Messages: 6
Registered: May 2009

Esquire

Hi, in almost every window in the driver parameters section pressing pops up a window, where you put T/S parameters in and the program computes the value. Or it is in the menu under Tools-Convert parameter.
K.

Report message to a moderator

Re: Hornresp MMD spec [message #40739 is a reply to message #40736]

Thu, 27 March 2003 11:33

Wayne Parham
Messages: 18792
Registered: January 2001

Illuminati (33rd Degree)

MMD is the moving mass of the diaphragm. There is a conversion tool that is made available when you double-click on this parameter in edit mode. Just click twice and Hornresp will ask you some questions and then calculate MMD for you using the information provided.

Report message to a moderator