AudioRoundTable.com: Pi Speakers » 2pi tower dimensions, using 3/4" mdf

Home » Sponsored » Pi Speakers » 2pi tower dimensions, using 3/4" mdf

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

2pi tower dimensions, using 3/4" mdf [message #40175]

Thu, 06 February 2003 12:42

bsuhy
Messages: 6
Registered: May 2009

Esquire

Sorry, I have been doing a lot of reading in the forum, and I haven't seen this answered.

I can't find any 5/8 mdf to build my 2-pi towers from, so I am going to use 3/4" mdf.

Should I try to keep the internal volume the same ( I computed it to be 7755 cubic inches ) or should I make it larger? If larger, by how much?

Thanks..

Report message to a moderator

Re: 2pi tower dimensions, using 3/4" mdf [message #40177 is a reply to message #40175]

Thu, 06 February 2003 12:47

Wayne Parham
Messages: 18792
Registered: January 2001

Illuminati (33rd Degree)

With a cabinet volume this large, the difference of panel thickness on total displacement volume is pretty small. What's more important is that you cut the right size port.

Report message to a moderator

Previous Topic:	Wayne: Advice for EV LS12A drivers in Pi Alignment?
Next Topic:	Compare Thermionic 3pi and tower 2pi

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Dec 03 17:15:31 CST 2024