I know this has been covered about 1000 times (maybe more)and I posted this over on the Bottlehead site as well, but just wanting to see if using these particular clips with a bleeder resistor would be the way to go to discharge caps? Just solder in the resistor after cutting the lead wire and heatshrinking everything 2-3 times over the resistor leads and edge of the resistor? Oh, and don't touch the resistor or let it touch other things, I'm thinking, as the cap discharges.
Wayne Parham Messages: 18793 Registered: January 2001
Illuminati (33rd Degree)
Those look like the clips often used on oscilloscope and multimeters. Should work pretty well. One thing to think about though: If the voltage is high so that there is a bit of arcing as the connection is made, the clip leads might erode over time. There's not a lot of meat on clips like this. Alligator clips are more sizeable, but then again, that means it would be harder to get them connected in tight spaces.
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
