AudioRoundTable.com: Group Build » My CSS (if the pic works)

Home » Audio » Group Build » My CSS (if the pic works)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

My CSS (if the pic works) [message #30715]

Fri, 25 February 2005 21:08

Forty2wo
Messages: 163
Registered: May 2009

Master

[URL=http://www.imageshack.us][IMG]http://img10.exs.cx/img10/4873/picture00562rx.jpg[/IMG][/URL]

Report message to a moderator

Re: My CSS (if the pic works) [message #30716 is a reply to message #30715]

Fri, 25 February 2005 21:28

PakProtector
Messages: 935
Registered: May 2009

Illuminati (2nd Degree)

I have the same heatsinks. Looks good. You're putting the bias LED's on the same board then? Looks nice. Test with a 9V and either a series ammeter or put a 10R resistor in series and measure the voltage on the sense resistor.

No sense twisting the adjust screw when thigs are hot.
regards,
Douglas

Report message to a moderator

His CSS (the pic works, check my post before this) [message #30717 is a reply to message #30716]

Fri, 25 February 2005 21:31

PakProtector
Messages: 935
Registered: May 2009

Illuminati (2nd Degree)

I put exactly this in the image URL:

http://img10.exs.cx/img10/4873/picture00562rx.jpg

That's not my CCS, it is Forty2wo's pic.
regards,
Douglas

Report message to a moderator

Previous Topic:	The Poinz!
Next Topic:	5V CT rectifier hookup - help

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 23 15:10:47 CST 2024