Home » Audio » General » Sherwood SEL 400 volume potentiometer
Sherwood SEL 400 volume potentiometer [message #26573] Sat, 26 August 2006 04:49 Go to next message
PeterC1 is currently offline  PeterC1
Messages: 1
Registered: May 2009
Esquire
Hallo,

Potentiometer on my vintage Sherwood SEL 400 (about 1973) integrated amplifier is broken, damaged-no way to repair. Potentiometer has three sections - two for stereo, plus one - last section for power on off swich. Theare is already loudness correction on the last 1/3 of full lenght. Nominal resistance is 50k Ohm, it is linear, otherway dimensions are quite ordinary one. (Theare is already label on potentiometer with marks: CTS, Type TV-TCC )

Bad news is that it is quite rearly to find such potentiometer those days in electronic shops. Almost unpossible

I would realy very appreciate every information or help to find that potentiometer.
(my e-mail is: peter.bergant@elektro-ljubljana.si)

Best regards, Peter

Re: Sherwood SEL 400 volume potentiometer [message #26574 is a reply to message #26573] Mon, 28 August 2006 10:06 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18793
Registered: January 2001
Illuminati (33rd Degree)

Check here, hopefully they'll have a part that will work for you:

Previous Topic: Ok, here are my thoughts on Peter Aczel and the Audio Critic Mag.
Next Topic: The Hardest Thing To Learn
Goto Forum:
  


Current Time: Sun Dec 22 23:12:56 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest