| Vintage Fisher Amp [message #26461] |
Thu, 02 March 2006 18:54  |
Peter Swartz
Messages: 56
Registered: May 2009
|
Baron |
|
|
I have all my Dads old gear, Thorens td-124, Fisher CX2-400, SA-300b,T-1000. I'm cuurently only using the turntable and the amp. I'm interested to learn more about the design of my Fisher Sa-300b amp. Does anyone know where I can find more info on this amp? Thanks, Pete
|
|
|
|
|
|
|
|
| Re: Vintage Fisher Amp [message #26469 is a reply to message #26466] |
Tue, 14 March 2006 06:42  |
Manualblock
Messages: 4973
Registered: May 2009
|
Illuminati (13th Degree) |
|
|
I have an idea but you may not like it. Inside there are only a few things that cause problems. Barring something like a transformer failure the only things you need to replace are all the electrolytic caps, critical resistors,ie grid or bias and possibly the coupling caps.
The thing is these am,ps were so well designed and used such good quality parts that you will not really get a better sound with newer type passive parts. Even carefully matched carbon-comp resistors will sound better than the newer metal-film.
What I see most guys doing now is leaving the equipment alone; replacing the caps I mentioned and re-tubing the amp as well as repairing any minor problems should get you some of the most musical sound money can buy. The design is great on that unit and it pumps more power than you will ever need. Clean it up and have a good tech go through the amp with a scope to make sure there are no problems and then sit back and enjoy.
Lot of times people replace everything with new expensive parts and end up selling the unit because it sounds worse.
|
|
|
|
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
