Home » Audio » Speaker » Two New Line Array Kits
Two New Line Array Kits [message #22775] Fri, 12 August 2005 07:11 Go to next message
FredT is currently offline  FredT
Messages: 704
Registered: May 2009
Illuminati (1st Degree)
Selah Audio and GR Research are both offering newly designed line array kits that sell for less than $1,000. Rick and Danny are able to offer "quasi array" kits at this price by combining an array of woofers with a single centrally located ribbon tweeter. Enclosure plans are included with both kits. I have built quasi array and full array enclosures before, and the quasi array enclosures are no harder to build than point source two-ways, just a bit more work.

The Selah "Day Tek" kit includes nine Dayton RS-150 woofers with a single Fountek tweeter. It is designed to be augmented with a subwoofer, but a full range version that subsitutes eight RS-180 woofers is available for the same price ($800/pr). The Day Tek tweeter is located alongside the woofer array, so the enclosure can be modified later to include a full tweeter array. A photo can be seen on the Selah web site gallery pages.

The GR Research array includes eight of GR's proprietary M-130 woofers and a RA-104.5 ribbon tweeter. The RA8 is offered as a joint GR/RAW Acoustics kit and will be unveiled at the RMAF. The "pre order" price is $800; regular price will be $900. The RA8 is a ported full range design. Photo of the unfinished enclousure at the Audio Circle GR Research forum. The RA8 will be a bit easier to build than the Day Tek because the M-130 woofers have a smoothly curved flange, so a simple cutout with no recess can be used.

These new offerings are significant because they provide an opportunity to own a line array that uses high quality drivers for about $1,000 including the price of the enclosure materials. Past offerings in this price range have been few, and they were usually compromised by their budget priced drivers.


Links-Two New Line Array Kits [message #22776 is a reply to message #22775] Fri, 12 August 2005 10:28 Go to previous messageGo to next message
Rudy Jakubin is currently offline  Rudy Jakubin
Messages: 2
Registered: May 2009
Esquire
The DayTek's
http://www.selahaudio.com/id103.html
The RA8
http://www.audiocircle.com/circles/viewtopic.php?t=20593

Very nice design's. Congrat's to both of them.
The DayTek's are intrigueing. "Add more ribbons later"...


Re: Two New Line Array Kits [message #22777 is a reply to message #22775] Fri, 12 August 2005 10:46 Go to previous messageGo to next message
RAW is currently offline  RAW
Messages: 11
Registered: May 2009
Chancellor
Fred
The RA8 is a RAW Acoustics product.
Danny is designing the RA8.
I have Danny doing the crossover design as he has done something very similar for a customer in the past.
And I have no issues with having Danny design the crossover at all.

Yes the complete RA8 can be made for around $1000.00
MDF
poly
ect

That was my objective with the RA8 $1000.00 complete



Re: Two New Line Array Kits [message #22778 is a reply to message #22777] Fri, 12 August 2005 13:07 Go to previous messageGo to next message
FredT is currently offline  FredT
Messages: 704
Registered: May 2009
Illuminati (1st Degree)
Thanks for the clarification about the fact that it's a RAW Acoustics product. I have built some speakers using a woofer array with a single tweeter. The drivers in mine were not as good as the ones in the RA8, but I still found this type of array offers most of the advantages of a full woofer & tweeter array at a much more affordable price. This will be a nice addition to the other diy speaker kits that are available.

Re: Two New Line Array Kits [message #22779 is a reply to message #22778] Fri, 12 August 2005 13:17 Go to previous messageGo to next message
RAW is currently offline  RAW
Messages: 11
Registered: May 2009
Chancellor
Thanks.
Yes these types of arrays have a few good points to them.
Best of all the price.


Re: Links-Two New Line Array Kits [message #22780 is a reply to message #22776] Fri, 12 August 2005 14:14 Go to previous messageGo to next message
justinc is currently offline  justinc
Messages: 32
Registered: May 2009
Baron
The dayteks also have a fantastic matching center channel available. The pair up on Ricks site are mine, and I must say for the price I think this type of design is the way to go. Even after I spent quite a bit on that maple burl veneer The arrays ended up only costing around $1100. They did take a while to build but it was well worth it in the end.

Re: Links-Two New Line Array Kits [message #22781 is a reply to message #22780] Fri, 12 August 2005 16:41 Go to previous message
FredT is currently offline  FredT
Messages: 704
Registered: May 2009
Illuminati (1st Degree)
With the burl veneer they're definitely some of the nicest looking enclosures I've seen.

Previous Topic: Question on wires between binding posts & cones
Next Topic: directivity
Goto Forum:
  


Current Time: Thu Nov 28 08:04:41 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest