AudioRoundTable.com: Speaker » JBL 2240H for midbass duty

Home » Audio » Speaker » JBL 2240H for midbass duty

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

JBL 2240H for midbass duty [message #19461]

Mon, 17 March 2008 11:55

spkrman57
Messages: 522
Registered: May 2009

Illuminati (1st Degree)

I was just wondering if anyone has used the JBL 2240H 18" driver for midbass duty similiar to how the 2226 is used in the 4 pi-pro series?

According to winisd I have come up with 5 cubic ft box tuned to 50hz for a -3 db @ 52hz.

If anyone can comment on this I would appreciate it!

Response down to approx 50hz would be required!

Regards, Ron

Report message to a moderator

Re: JBL 2240H for midbass duty [message #19462 is a reply to message #19461]

Mon, 17 March 2008 13:51

Bill Wassilak
Messages: 402
Registered: May 2009

Illuminati (1st Degree)

The only problem I see is you'd have to lower the x-over freq. where it crosses over to the midrange, for proper DI matching between the 18 and midrange.

Report message to a moderator

Re: JBL 2240H for midbass duty [message #19463 is a reply to message #19462]

Tue, 18 March 2008 13:31

spkrman57
Messages: 522
Registered: May 2009

Illuminati (1st Degree)

Appreciate the info on the Di factor and crossover level. I already have that factored in the process.

What I was looking for is to see if anyone has tried a different box/tuning with this driver, and what the results were.

These will most likely be used in a pair of JBL L200 cabs and used in corners for further room reinforcement.

Ron

Report message to a moderator

Previous Topic:	Re: smoothing Zobel? tick but not if result is less than 91db/w!
Next Topic:	? ART Array VS Zaph's BAMTM

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 28 00:14:51 CST 2024