AudioRoundTable.com: Speaker

Home » Audio » Speaker » Sim help?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Sim help? [message #18640]

Sat, 04 March 2006 19:09

PakProtector
Messages: 935
Registered: May 2009

Illuminati (2nd Degree)

hey-Hey!!!,
Is there anybody who'd render a bit of modeling assistance for a front horn and driver?

Driver is EV's DL10X. The horn will be a conical, 5' axial, 40-degree included angle, 6" throat. Back volume is TBD and will be adjustable in place.

For complete driver specs...
http://www.telex.com/Electrovoice3/files.nsf/Pages/DL10X/$file/dl10x-eds.pdf

Thanks in advance.
cheers,
Douglas

Report message to a moderator

Hornresp [message #18642 is a reply to message #18640]

Mon, 06 March 2006 15:03

Wayne Parham
Messages: 18784
Registered: January 2001

Illuminati (33rd Degree)

Do you have Hornresp? If not, grab a copy. Entering the electro-mechanical parameters is a snap, just click on the fields in the lower area of the screen and type them in. You can even double click these fields and the program will prompt you for T/S specs, which it will then convert to force/mass/compliance values. The rest of the data entry is equally simple, just enter length and area and front and rear chamber volume. If you get confused, I'll send you one of my data files as a starting reference. You can always write a post here if you get stuck.

Report message to a moderator