AudioRoundTable.com: Speaker » l-acoustics mtd 115a reliability

Home » Audio » Speaker » l-acoustics mtd 115a reliability

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

l-acoustics mtd 115a reliability [message #15244]

Thu, 23 March 2006 03:12

steve wells
Messages: 5
Registered: May 2009

Esquire

Any one using l-acoustics mtd line (a series). we have found consistent niggling faults in robustness...resonating dust covers on hf. wear and tear after very minimal use.
feedback welcome

Report message to a moderator

Re: l-acoustics mtd 115a reliability [message #15245 is a reply to message #15244]

Thu, 23 March 2006 08:21

Wayne Parham
Messages: 18786
Registered: January 2001

Illuminati (33rd Degree)

Thanks for reporting that. I've had a few - maybe 1 out of 500 - Eminence units with loose or misaligned dust caps. One had been glued only on about 20% of the edge of the cap, so most of it was loose and buzzed.

Report message to a moderator

Previous Topic:	POsting measurements here & copyright: Help, Wayne
Next Topic:	Experience with BMS 4592 ND (16 Ohm)? A few questions - Bill M.?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Nov 24 12:24:30 CST 2024