Home » Audio » Source » Sony PS-LX250H Turntable, Auto mechanism problem
Sony PS-LX250H Turntable, Auto mechanism problem [message #12023] Mon, 28 March 2005 04:41 Go to next message
bpage is currently offline  bpage
Messages: 4
Registered: May 2009
Esquire
Hello , i've recently bought a the PS-LX250H turntable from Sony, and the playing of records is just fine except for one problem... When pressing the "start" button to auto-play a record, the arm lifts, slides to the record, puts the stylus down normally, but 2 secs later, it picks up the stylus, and gets back into the off position and the turntalbe stops. What could be wrong?

Thanks
B. Page

Re: Sony PS-LX250H Turntable, Auto mechanism problem [message #12025 is a reply to message #12023] Mon, 28 March 2005 06:07 Go to previous messageGo to next message
Manualblock is currently offline  Manualblock
Messages: 4973
Registered: May 2009
Illuminati (13th Degree)
You need to open the table and look underneath. There are two arms and a pair of gears that move the arm. When the arm stops too soon it is most liklely that one of the gears is either mis-aligned or the rubber band that puts tension on the rotating gear arm is worn out.
You can play with it but it probably needs someone who does this.

Re: Sony PS-LX250H Turntable, Auto mechanism problem [message #12031 is a reply to message #12025] Tue, 29 March 2005 06:34 Go to previous message
bpage is currently offline  bpage
Messages: 4
Registered: May 2009
Esquire
thanks manualblock, ill try tonight

Previous Topic: Rega belts
Next Topic: Just upgraded my source to older hi-fi: Museatex By Ed Meitner
Goto Forum:
  


Current Time: Sun Dec 22 05:05:20 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest