AudioRoundTable.com: Pi Speakers » Wayne, can I purchase the crossover circuit board only for Pi4?

Home » Sponsored » Pi Speakers » Wayne, can I purchase the crossover circuit board only for Pi4?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Wayne, can I purchase the crossover circuit board only for Pi4? [message #82315]

Tue, 29 March 2016 07:00

OneBean
Messages: 37
Registered: May 2009

Baron

I've been collecting some capacitors and resistors to sample, and I would like to build a second set of cross overs to A/B against the stock setup. I was hoping I could buy just the circuit board and use my own components to build them up. Let me know if they are available, what the cost is, and how to order them. Thanks.

Could you also send plans for 2Pi bookshelf. I'm planning a summer project with my sons, building them either Pi1 or Pi2 for their bedrooms. They are excited.

Onebean

Report message to a moderator

Re: Wayne, can I purchase the crossover circuit board only for Pi4? [message #82316 is a reply to message #82315]

Tue, 29 March 2016 08:19

Wayne Parham
Messages: 18785
Registered: January 2001

Illuminati (33rd Degree)

Yes, crossover boards are available stuffed or unstuffed. Just go to the shopping cart and order; We have them in stock.

Report message to a moderator

Re: Wayne, can I purchase the crossover circuit board only for Pi4? [message #82318 is a reply to message #82316]

Wed, 30 March 2016 07:36

OneBean
Messages: 37
Registered: May 2009

Baron

Wayne, I ordered the unstuffed boards this morning. Is there a detailed layout of where to connect all the crossover components? I studied the Pi4 plans last night, and have most of it figured out. I'm just scratching my head on which trace the inductors get soldered onto, and want to double check my other assumptions.

I assumed I could look at my existing crossovers to double check myself, but my existing crossovers must be an old version, because they don't look anything like the boards I ordered.

Also, can you please email me the Pi2 bookshelf plans?

Thanks.

Report message to a moderator

Re: Wayne, can I purchase the crossover circuit board only for Pi4? [message #82321 is a reply to message #82318]

Wed, 30 March 2016 12:10

Wayne Parham
Messages: 18785
Registered: January 2001

Illuminati (33rd Degree)

I sent plans yesterday, so please check your mail.

As for the PCB, see the board layout:

http://www.PiSpeakers.com/Pi_Crossover_PCB.gif

There are some locations that are "double populated," meaning different components are used depending on application. Some places have both resistors and inductors, for example. In those places, you can trace the etch to see where to connect.

Report message to a moderator

Previous Topic:	2pi Tower Plans
Next Topic:	woofer type

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 21 10:34:44 CST 2024