AudioRoundTable.com: Pi Speakers » 7Pi placement in my room

Home » Sponsored » Pi Speakers » 7Pi placement in my room

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

7Pi placement in my room [message #80042]

Thu, 05 June 2014 16:52

Nelson Bass
Messages: 39
Registered: November 2012

Baron

Hi Wayne,

I'm tempted to build the 7Pi Corner Horns.

But I wonder if the placement in my room will make the 7Pi justice.

I have to place a stereo cabinet on the front wall between the corner horns and a (closed) door near the left speaker is inevitable.

I even dare to put a coffee table in front of my sofa...

What do you think?

Attachment: 7pi_corner.png
(Size: 562.60KB, Downloaded 3896 times)

Report message to a moderator

Re: 7Pi placement in my room [message #80047 is a reply to message #80042]

Fri, 06 June 2014 06:37

Wayne Parham
Messages: 18783
Registered: January 2001

Illuminati (33rd Degree)

If the closed door doesn't vibrate, that will be fine. But I do worry the door might rattle.

Report message to a moderator

Re: 7Pi placement in my room [message #80057 is a reply to message #80047]

Sun, 08 June 2014 06:53

Nelson Bass
Messages: 39
Registered: November 2012

Baron

I'll do my best to prevent the door from rattling.

I have seen older 7pi bass horns with a more complex structure around the port so I'm in doubt that I understand your current design right:

Attachment: sevenPi_port.png
(Size: 62.54KB, Downloaded 3386 times)

Report message to a moderator

Re: 7Pi placement in my room [message #80060 is a reply to message #80057]

Mon, 09 June 2014 10:48

Wayne Parham
Messages: 18783
Registered: January 2001

Illuminati (33rd Degree)

You've got it right. Older models used a "periscope port" but this "L-shaped port" layout is simpler. Other than that, there is no advantage or disadvantage either way - Both work the same.

Report message to a moderator

Re: 7Pi placement in my room [message #80119 is a reply to message #80060]

Sat, 21 June 2014 05:02

Nelson Bass
Messages: 39
Registered: November 2012

Baron

Great!

I like to keep things as simple as simple as possible so I changed the bottom panel just to cover the box and removed the panels intended for the corners.

To keep the cabinet sturdy in the corner I added L-shaped profiles to be bolted to the walls.

Go or no go?