AudioRoundTable.com: Pi Speakers » auralex wedges in place of R13

Home » Sponsored » Pi Speakers » auralex wedges in place of R13

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

auralex wedges in place of R13 [message #73093]

Thu, 21 June 2012 20:34

zheka
Messages: 80
Registered: June 2012
Location: Chicago burbs

Viscount

I have some leftover auralex wedges that I am considering to use instead of R13 to line up the enclosures.
Is there any reason to believe it will not be as effective as R13 for the job?

Report message to a moderator

Re: auralex wedges in place of R13 [message #73094 is a reply to message #73093]

Thu, 21 June 2012 21:57

Wayne Parham
Messages: 18783
Registered: January 2001

Illuminati (33rd Degree)

No, don't use it. Use the R13 as described in the plans - lining the side, back and top or bottom (depending on model) and one sheet spanning the cross-section.

Report message to a moderator

Re: auralex wedges in place of R13 [message #73103 is a reply to message #73094]

Fri, 22 June 2012 15:18

zheka
Messages: 80
Registered: June 2012
Location: Chicago burbs

Viscount

Thank you.

Are 4pi crossovers built based on the specific drivers combinations or the drivers are sufficiently similar so that the same crossovers can be used?

Report message to a moderator

Re: auralex wedges in place of R13 [message #73104 is a reply to message #73103]

Fri, 22 June 2012 15:30

Wayne Parham
Messages: 18783
Registered: January 2001

Illuminati (33rd Degree)

We need to know the drivers chosen. Please tell us in the notes section when you place your order. If you forget, we will email you and ask.

Report message to a moderator

Re: auralex wedges in place of R13 [message #73105 is a reply to message #73104]

Fri, 22 June 2012 15:33

zheka
Messages: 80
Registered: June 2012
Location: Chicago burbs

Viscount

makes perfect sense. thank you

Report message to a moderator

Re: auralex wedges in place of R13 [message #73150 is a reply to message #73093]

Thu, 28 June 2012 05:32

thatsnasty
Messages: 12
Registered: June 2012
Location: Niagara Falls

Chancellor

Wayne is there anything else that will work in place of R13?

I'm in Canada and it's impossible to find that stuff here... I've looked everywhere. I can get R14 or similar insulation types around 3-3 1/2" thickness, but that's about it.

Report message to a moderator