AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » 12Pi (12Pi knock down wood kit)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

12Pi [message #73056]

Wed, 20 June 2012 07:56

mantha3
Messages: 72
Registered: May 2012
Location: Lino Lakes, MN

Viscount

Wayne,

What wood do you use for the 12PI Knock down wood? Looks like Baltic Birch Ply?

Also,

I've got a future project in mind to build a pair of 4PI for home use... Is the 12Pi too much sub for these speakers in a home setting?

Thanks,
Andy

Report message to a moderator

Re: 12Pi [message #73059 is a reply to message #73056]

Wed, 20 June 2012 14:19

Wayne Parham
Messages: 18789
Registered: January 2001

Illuminati (33rd Degree)

The 12π hornsub (and flatpack kit) is made using five sheets of 19mm baltic birch, all CNC cut.

For home hifi, it is extreme overkill. I'd prefer using a pair of three π subs flanking the mains and another pair in the opposite corners of the room. That way you'll smooth room modes as well as gain extension, and you just really don't need the brute force or size of the hornsubs.

Now then, if you're trying to drive a stadium, that's a different story entirely...

Report message to a moderator

Previous Topic:	LSAF 2012 thoughts from afar
Next Topic:	I'm not much for birthdays, usually, but...

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 28 05:24:47 CST 2024