Home » Sponsored » Pi Speakers » Clamp Rack
Clamp Rack [message #72818] Fri, 25 May 2012 16:42 Go to next message
Bill Epstein is currently offline  Bill Epstein
Messages: 1088
Registered: May 2009
Location: Smoky Mts. USA
Illuminati (2nd Degree)
This was so easy. Why did I wait so long to get the clamps off the floor and out of the corners?

First, I needed a crosscut sled because the miter gauge that came with my cheap-ass tablesaw sucks. Second, I thought I needed a dado set for the saw. Second, Part B, w/o a dado set I'd have to make numerous passes with the standard blade to cut the kerfs.

Well, retirement's main virtue is time and it's evil counterpart vice, empty time. I had time to fill so I made the sled this A.M. and found a website that showed drilling a hole at the back of the kerf which means only 2 saw passes per. Why didn't I think of that?

Ecco! Clamps on the wall before lunch!

index.php?t=getfile&id=785&private=0

Re: Clamp Rack [message #72819 is a reply to message #72818] Fri, 25 May 2012 18:28 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18786
Registered: January 2001
Illuminati (33rd Degree)

Now that's the right way to do it!

Re: Clamp Rack [message #72827 is a reply to message #72818] Sat, 26 May 2012 05:24 Go to previous messageGo to next message
Nick77 is currently offline  Nick77
Messages: 44
Registered: February 2011
Location: Austin
Baron
You need a project. Laughing
Re: Clamp Rack [message #72828 is a reply to message #72827] Sat, 26 May 2012 07:12 Go to previous messageGo to next message
Bill Epstein is currently offline  Bill Epstein
Messages: 1088
Registered: May 2009
Location: Smoky Mts. USA
Illuminati (2nd Degree)
Nick77 wrote on Sat, 26 May 2012 06:24
You need a project. Laughing


Just finishing one, waiting for the Cinemag transformers to arrive.

index.php?t=getfile&id=786&private=0

Will start construction of the 2Pi Towers when I get back from Ribfest next week

icon14.gif  Re: Clamp Rack [message #72911 is a reply to message #72819] Mon, 04 June 2012 10:46 Go to previous message
mgalusha is currently offline  mgalusha
Messages: 13
Registered: January 2012
Location: Colorado Prairie
Chancellor
Nice, been trying to figure out a good way to store the clamps, that is nice and tidy.

Mike G.
Previous Topic: Wood used in 4PI construction
Next Topic: would these work with the 3pi design?
Goto Forum:
  


Current Time: Sun Nov 24 12:56:27 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest