Home » Audio » Thermionic Emissions » Promise not to tell?
Promise not to tell? [message #9037] Thu, 23 June 2005 14:49 Go to next message
BillEpstein is currently offline  BillEpstein
Messages: 886
Registered: May 2009
Illuminati (2nd Degree)
Really promise?
OK. GE 5 Star 5751's in the Norh SE-9 are the BOMB!
Shhh! We don't want E-Bayers running up the prices.

Not nice to start rumors... [message #9038 is a reply to message #9037] Thu, 23 June 2005 21:14 Go to previous messageGo to next message
Triode_Kingdom is currently offline  Triode_Kingdom
Messages: 13
Registered: May 2009
Chancellor
After giving the curves and specs a quick look, I believe this is another 12AX7 variant. They are already overvalued on eBay.

Rumours, [message #9039 is a reply to message #9038] Thu, 23 June 2005 22:29 Go to previous messageGo to next message
Poindexter is currently offline  Poindexter
Messages: 108
Registered: May 2009
Viscount
What do you know about 12BZ7's, my man?  I got a bunch of these on a deal, because they have the same gain with twice the g and twice the gm of a 12AX; they looked like they could drive the RIAA from Hell.

I have heard that:
They are wildly variable in their characteristics, example-to-example (including in the same envelope),
They have a very short service lifetime, and then go hideously microphonic,
They tend to noise,
Other horrors.

Ever fool (I mean experiment) with any of these?

Y O S

Poinz



Re: Rumours, [message #9040 is a reply to message #9039] Fri, 24 June 2005 00:31 Go to previous messageGo to next message
Triode_Kingdom is currently offline  Triode_Kingdom
Messages: 13
Registered: May 2009
Chancellor
Sorry, never tried 'em. The plate curves don't seem to be as linear as the 'AX7, but that's minor compared to the possible flaws you listed.


Re: Rumours, [message #9041 is a reply to message #9040] Sat, 25 June 2005 19:35 Go to previous messageGo to next message
Poindexter is currently offline  Poindexter
Messages: 108
Registered: May 2009
Viscount
Pretty things, big ol plates. At a millivolt on the grid, we don' need no steenkin' linear.   I was going to use them in the first stage of a phono amp, so I could put any nasty LCR RIAA in one lump, then maybe a 6922 SRPP output, minimize stages.

I don't have a turntable anyway, so they sit on the shelf.

Thanks,

Poinz

Re: Promise not to tell? [message #9042 is a reply to message #9037] Sat, 25 June 2005 22:40 Go to previous messageGo to next message
metasonix is currently offline  metasonix
Messages: 103
Registered: May 2009
Viscount
If you gents had read my 12AX7 tests in VTV issues 1 and 14, you'd know that 5751s usually had lower distortion on average than 12AX7s or 7025s, in typical RC-coupled circuits. (Just a friendly reminder.)


Re: OT: Care To Comment... [message #9043 is a reply to message #9042] Sun, 26 June 2005 14:42 Go to previous messageGo to next message
Brucie is currently offline  Brucie
Messages: 8
Registered: May 2009
Esquire
on your 811-10 amp discussion over on the Group Build Forum?

Re: Promise not to tell? [message #9044 is a reply to message #9037] Sun, 26 June 2005 19:47 Go to previous messageGo to next message
GarMan is currently offline  GarMan
Messages: 960
Registered: May 2009
Illuminati (2nd Degree)
I've always had JAN 5751 in my headphone amp and sounds nicer than any 12AX7 I've tried. Listening to them right now.


Re: OT: Care To Comment... [message #9045 is a reply to message #9043] Mon, 27 June 2005 07:47 Go to previous messageGo to next message
colinhester is currently offline  colinhester
Messages: 1349
Registered: May 2009
Location: NE Arkansas
Illuminati (3rd Degree)
Thanks, I was going to write Eric shortly and ask. The wife has been in Boston for the last week, and I've been Mr. Mom to 4 kids (all 5 and under.) BTW, I've got most of the parts on order, just need to nail down the resistors. I think I'm going going with 2W Kiwames across the board......Colin

Phono Pre [message #9046 is a reply to message #9041] Tue, 28 June 2005 14:21 Go to previous messageGo to previous message
Triode_Kingdom is currently offline  Triode_Kingdom
Messages: 13
Registered: May 2009
Chancellor
Yes, they're probably a good choice for the first stage. I prefer pentodes like the EF86 for that use, but triodes also work well.


Previous Topic: Fixed Bias v. Cathode Bias
Next Topic: Zout
Goto Forum:
  


Current Time: Sat Dec 21 19:22:15 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest