AudioRoundTable.com: Pi Speakers » I will check the cables first...I will check the cables first...I will check the cables first...

Home » Sponsored » Pi Speakers » I will check the cables first...I will check the cables first...I will check the cables first...

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

I will check the cables first...I will check the cables first...I will check the cables first... [message #52555]

Fri, 29 August 2008 22:51

Bill Epstein
Messages: 1088
Registered: May 2009
Location: Smoky Mts. USA

Illuminati (2nd Degree)

I will check the cables first... I will check the cables first...I will check the cables first...I will check the cables first...

Don't ask.

Report message to a moderator

Don't ask? [message #52557 is a reply to message #52555]

Sun, 31 August 2008 02:18

Wayne Parham
Messages: 18783
Registered: January 2001

Illuminati (33rd Degree)

That's like starting a compelling story and stopping just before the end. You gotta let us here the rest!

Report message to a moderator

Re: Don't ask? [message #52560 is a reply to message #52557]

Sun, 31 August 2008 06:12

Bill Epstein
Messages: 1088
Registered: May 2009
Location: Smoky Mts. USA

Illuminati (2nd Degree)

Hardly compelling; discovering a ground fault hum when first powering up Friday, I went after the known loose RCA females attached to the Faraday cage of my tonearm. 4 hours later, I can now field-strip an SME III in the dark but everything is OK except I can discern no way to tighten the crimp-on connectors to the cage.

Turning to the phono IC's, I discover no continuity for the right channel neutral in about 10 seconds and fix it in 10 minutes.

As others have reported, the Eichmann Bullet neutral pin is fragile and had broken right where it inserts into the plastic collar. I "glued" it back together with solder so expect it to fail again. No more Eichmanns for me.

Report message to a moderator

Re: Don't ask? [message #52562 is a reply to message #52560]

Sun, 31 August 2008 11:03

Matts
Messages: 359
Registered: May 2009

Grand Master

I thought you might have done what I did with the last pair of new speakers- I got a phone call after moving them in position, got off, and went back and turned everything on for a listen and silence. After a brief panic, I realized I had unhooked the cables from the other speakers, but hadn't connected the new ones yet...

Report message to a moderator