AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » 4Pi Pro port?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

4Pi Pro port? [message #52390]

Fri, 01 August 2008 05:41

Bill Epstein
Messages: 1088
Registered: May 2009
Location: Smoky Mts. USA

Illuminati (2nd Degree)

Can the port be 6" wide by 3 1/2" tall and 10" deep? Or better yet, 10"w x 3 1/2" x 6" deep?

Report message to a moderator

Re: 4Pi Pro port? [message #52391 is a reply to message #52390]

Fri, 01 August 2008 11:11

Wayne Parham
Messages: 18783
Registered: January 2001

Illuminati (33rd Degree)

The port should be 6" x 3.5" and 10" long. It doesn't matter if the wide dimension is horizontal or vertical, although if the tweeter is mounted internally, it's a tight fit and has to go the way it is. But if you move the tweeter up on top and move the woofer up to keep the distances the same, you can change where the port is. Don't change the length though, it should always be 10". Also, remember this is for the stock box size. If you make a larger box, the port size changes. You want the Helmholtz frequency to be 38Hz.

Report message to a moderator