Thought I would drop by and see how things were going. Looks like business is good! How are things?

I was wondering if you could help me design an exponential midrange horn for an Eminence Delta 10". Something to operate from roughly 250-2000 hz with a good amount of gain but also smooth response. The physical size of the horn isn't much an issue, although if I could keep the maximum height, width and depth to 24" that would be great. I would like to pair them up side by side, so I suppose the horn mouth area could be shared by two of the drivers side by side?

I'd appreciate any help!

Hope all is well Wayne. Drop me a line if you'd like on e-mail. celestion1384@hotmail.com

Adam

Specifications: *Power handling: 350 watts RMS *VCdia: 2.5" *Le: 0.74 mH *Impedance: 8 ohms *Re: 5.42 ohms *Frequency range: 63-3,700 Hz *Magnet weight: 56 oz. *Fs: 66 Hz *SPL: 98.8 dB 1W/1m *Vas: 1.1 cu. ft. *Qms: 6.53 *Qes: 0.35 *Qts: 0.33 *Xmax: 3.5 mm * Dimensions: Overall Diameter: 10.09", Cutout Diameter: 9.05", Mounting Depth: 4.25".

Adam

By the way, I don't know if you remember, but I've always used conical horns. I prefer their directional characteristics, so I've always used them instead of other shapes.

• Indoor midhorn
  
• Outdoor midrange/midbass horns