If it's necessary to pad the woofer, how would I effect that?

The Morel appears to be able to go down to 1600Hz so it would be a drop in to replace the DE-250 I'm now using. Comments?

• MDT-37

Here is an interesting design using an Audax TWO34X-P47N tweeter in unison with a wave guide.

If you are wanting to specifically use a dome tweeter with the 2226. This could be a choice that has a higher sensitivity rating where it should be easier to mate it to your woofer.

FYI

Norris Wilson

• http://www.troelsgravesen.dk/JA8008.htm

In the four π loudspeaker, the horn tweeter directivity is matched to the midwoofer in the crossover range. This allows a smooth transition not only on-axis but off-axis as well. Plus, the sensitivity of the woofer is just right for matching the tweeter's passive EQ scheme. You need about 10dB to provide conjugate compensation of the power response curve, and that's the amount of difference between woofer and tweeter, so it's a perfect match. There's synergy in that combination.