Home » Sponsored » Pi Speakers » 12 woofer
12 woofer [message #51409] Tue, 18 September 2007 11:25 Go to next message
j.luis is currently offline  j.luis
Messages: 22
Registered: May 2009
Chancellor
Hy .Wayne do you believe that this Eminence 1512 with specs =Fs (41 hz) - Qts (0.65 ) - Qes ( 0.69) - Qms (8.95 ) - Vas ( 198 l) - Ebp (59.4) - Xmx ( 3mm ) - Spl ( 95 ) - Pwr (80 w ) could work in a Pi speaker . I modeled in Win Isd and give a enormous box 33 cuft but with a tuning frecuency of 21 hz using the scroll down handy option of Win Isd got a much more adequate box of 7 cuft with a tuning frequency of 37 hz . Do you believe that Pi program could give a better box ? I give thanks in advance for your much help . thanks

Re: 12 woofer [message #51410 is a reply to message #51409] Tue, 18 September 2007 14:09 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18783
Registered: January 2001
Illuminati (33rd Degree)

PiAlign suggests a 4.5ft3 (128 liter) cabinet tuned to 24Hz. It will work pretty well in cabinets from 4.0ft3 (113 liter) to 35ft3 (990 liter) tuned to 20Hz - 25Hz. You could also use it on an open or infinite baffle, perhaps mounted to one side of a room's wall, with the rear exposed to the open attic or an adjacent room.


Previous Topic: request plan
Next Topic: Cornerhorn too much?
Goto Forum:
  


Current Time: Tue Nov 05 22:30:35 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest