Home » Audio » Speaker » Ready on the firing range (pic)
Ready on the firing range (pic) [message #17779] Sun, 01 May 2005 14:17 Go to next message
wunhuanglo is currently offline  wunhuanglo
Messages: 912
Registered: May 2009
Illuminati (2nd Degree)
Proper horn is "lost in Chicago" according to vendor.

Re: Ready on the firing range (pic) [message #17780 is a reply to message #17779] Sun, 01 May 2005 16:46 Go to previous messageGo to next message
Wayne Parham is currently offline  Wayne Parham
Messages: 18709
Registered: January 2001
Illuminati (33rd Degree)

I'm diggin' that system. Good stuff, Charlie!


Re: Ready on the firing range (pic) [message #17782 is a reply to message #17779] Mon, 02 May 2005 10:58 Go to previous messageGo to next message
spkrman57
Messages: 522
Registered: May 2009
Illuminati (1st Degree)
Are the Altec and JBL drivers sharing the same internal enclosure?

I am just wondering why 2 different drivers in the same enclosure.

Try a Great Plains 399 driver on top with a 1.4" horn to really kick it out!!!

Ron

Re: Ready on the firing range (pic) [message #17784 is a reply to message #17782] Tue, 03 May 2005 05:26 Go to previous messageGo to next message
wunhuanglo is currently offline  wunhuanglo
Messages: 912
Registered: May 2009
Illuminati (2nd Degree)
There are two seperate enclosures (I can barely pick up one at a time). The bottom one is 25"X24"X24; the upper is 25"X24"X16" (approx). Pics are below.

At $2800 a pair retail I have high hopes for the 1.5" JBL 2435 drivers but I won't know until I get the horns in.

As far as GPA goes, thanks for the suggestion but I'd rather buy Bose first.

What's wrong with GPA??? [message #17787 is a reply to message #17784] Tue, 03 May 2005 07:30 Go to previous messageGo to next message
spkrman57
Messages: 522
Registered: May 2009
Illuminati (1st Degree)
You have me confused, you compare Great Plains Audio with Bose??? Is there a problem with GPA you have run into???

I have had nothing but great success with Bill at Great Plains. I have bought pairs of 416C's/902B's and just recently a pair of 399's(modern day version of 288K's) and I like the quality of the product, Bill is always willing to discuss pros and cons of application of the drivers and has had some good suggestions.

I am thinking you must have had a bad experience with something/someone.

Please e-mail me through this forum with more info, I am curious why you feel this way. I also notice you mentioned to Wayne about not using Iconic, so my curiosity if raised.

Regards, Ron

Re: What's wrong with GPA??? [message #17790 is a reply to message #17787] Wed, 04 May 2005 18:57 Go to previous messageGo to next message
Floyd Andrews is currently offline  Floyd Andrews
Messages: 31
Registered: May 2009
Baron
I agree. I recently bought a pair of 414-8c's from Bill, and they are very fine quality. It took a while to get them, but that can be expected from a small shop like GPA. I would not hesitate to do business with Bill again.

Horrible [message #17803 is a reply to message #17779] Sun, 08 May 2005 08:33 Go to previous messageGo to next message
wunhuanglo is currently offline  wunhuanglo
Messages: 912
Registered: May 2009
Illuminati (2nd Degree)
I was under the delusion that once I got the P.Audio 316 horns with their 100 X 100 dispersion this would work out. I was wronger than wrong. The horns were so far above the seated position you got only off-axis poo-poo. I could EQ it flat at one location, but the slightest change in position brought new horrors to the ear.

I put the JBL boxes on the floor, moved the big Altec boxes to the corner running them as mono subs with a line level 35Hz first-order filter. That will be a "movies only" thing.

With the horns at ear level, a Crown K on the 2225's and a Crown D-75A on the 2435's they at least play music now - maybe not great, but one whole hell of a lot better.

I've got to get back to working on the bathroom remodel - I think my wife has almost run out of patience with this project.

Re: Horrible [message #17805 is a reply to message #17803] Sun, 08 May 2005 20:25 Go to previous messageGo to next message
Mike.e is currently offline  Mike.e
Messages: 471
Registered: May 2009
Illuminati (1st Degree)
So The answer would be-to shift the acoustical axis downwards through xover changes/driver positioning?

I've got to get back to working on the bathroom remodel - I think my wife has almost run out of patience with this project.

Well atleast you have it up and running for tweakage later..

Mike.e

Driver position [message #17806 is a reply to message #17805] Sun, 08 May 2005 22:16 Go to previous messageGo to next message
wunhuanglo is currently offline  wunhuanglo
Messages: 912
Registered: May 2009
Illuminati (2nd Degree)
I just got the horn down to seated ear level, more or less. That way I wasn't EQ-ing for way off-axis response.

I'm already wondering about another attempt - this has had me facinated for quite a long time, but I never built one.

I've got the parts in a closet


Re: Driver position [message #17807 is a reply to message #17806] Sun, 08 May 2005 22:21 Go to previous messageGo to previous message
Mike.e is currently offline  Mike.e
Messages: 471
Registered: May 2009
Illuminati (1st Degree)
I love the old stuff-looking back at historical loudspeaker milestones gives you an idea of where we are headed-and often it doesnt sound bad!

Funny scoop?I dont know how it will sound in the low vocal range -but many are happy with BLH

Cheers!

Previous Topic: Lowthers DX2: First Impressions
Next Topic: Interesting sub cabinet design
Goto Forum:
  


Current Time: Tue Jun 18 05:41:29 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest