AudioRoundTable.com: Pi Speakers » 4pi: Cabinetmaker's build

Home » Sponsored » Pi Speakers » 4pi: Cabinetmaker's build

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 4pi: Cabinetmaker's build [message #99340 is a reply to message #99291]

Fri, 10 April 2026 21:53

dustboy
Messages: 10
Registered: March 2026

Chancellor

/forum/index.php?t=getfile&id=3568&private=0

I modeled this port to be 3D printed in PLA. Wall thickness is only 1/8", I'm wondering if the flat walls will resonate? I'd make it thicker but I have limited space on the baffle after adding the flange at the face.

Attachment: PORT.png
(Size: 51.20KB, Downloaded 312 times)

Report message to a moderator

[Message index]

		4pi: Cabinetmaker's build By: dustboy on Mon, 16 March 2026 21:35
		Re: 4pi: Cabinetmaker's build By: Wayne Parham on Tue, 17 March 2026 15:29
		Re: 4pi: Cabinetmaker's build By: dustboy on Thu, 02 April 2026 22:52
		Re: 4pi: Cabinetmaker's build By: Wayne Parham on Fri, 03 April 2026 09:39
		Re: 4pi: Cabinetmaker's build By: dustboy on Fri, 10 April 2026 21:53
		Re: 4pi: Cabinetmaker's build By: Wayne Parham on Fri, 10 April 2026 23:11
		Re: 4pi: Cabinetmaker's build By: petew on Mon, 27 April 2026 09:00
		Re: 4pi: Cabinetmaker's build By: dustboy on Wed, 03 June 2026 23:01
		Re: 4pi: Cabinetmaker's build By: Wayne Parham on Thu, 04 June 2026 08:54
		Re: 4pi: Cabinetmaker's build By: dustboy on Thu, 04 June 2026 15:52
		Re: 4pi: Cabinetmaker's build By: Wayne Parham on Thu, 04 June 2026 16:01
		Re: 4pi: Cabinetmaker's build By: dustboy on Thu, 04 June 2026 20:44
		Re: 4pi: Cabinetmaker's build By: Wayne Parham on Fri, 05 June 2026 09:20
		Re: 4pi: Cabinetmaker's build By: dustboy on Tue, 09 June 2026 12:45
		Re: 4pi: Cabinetmaker's build By: Wayne Parham on Tue, 09 June 2026 13:14
		Re: 4pi: Cabinetmaker's build By: Barryso on Tue, 09 June 2026 18:43
		Re: 4pi: Cabinetmaker's build By: dustboy on Wed, 10 June 2026 09:50

Previous Topic:	Request for Four Pi plan
Next Topic:	Pi Speakers FAQ

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Jun 18 22:32:22 CDT 2026