AudioRoundTable.com: Pi Speakers » 4Pi - alternate compression driver mounting?

Home » Sponsored » Pi Speakers » 4Pi - alternate compression driver mounting?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 4Pi - alternate compression driver mounting? [message #95155 is a reply to message #95154]

Mon, 31 January 2022 09:21

Wayne Parham
Messages: 18793
Registered: January 2001

Illuminati (33rd Degree)

Yes, you're working with much cleaner measurements now.

Get some stuffing in the cabinet and see if you can do anything with that peak around 120Hz. That is the difficult region I often talk about.

You'll notice the stock cabinet gently rises from 100Hz to 150Hz and then gradually drops to around 200Hz. This is the result of the positions of the midwoofer driver, port and insulation. It prevents the really big peaks and dips.

The peak in your cabinet is not unusual. I've seen a lot of cabinets like that. It doesn't sound terrible, but you do notice a throaty sound in male voices and other things. It just sounds "boxy."

So try lining the walls with insulation and also try placing a sheet that spans the cross-section of the cabinet between the port and the woofer. Might even use two of those. That cross-section "divider" sheet has proven to be the most effective, in my experience.

Report message to a moderator

[Message index]

		4Pi - alternate compression driver mounting? By: areohbe on Tue, 21 September 2021 13:16
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Wed, 22 September 2021 08:57
		Re: 4Pi - alternate compression driver mounting? By: alexg on Wed, 10 November 2021 11:35
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Wed, 10 November 2021 16:25
		Re: 4Pi - alternate compression driver mounting? By: alexg on Sat, 13 November 2021 11:03
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Sun, 14 November 2021 00:23
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Mon, 29 November 2021 12:03
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Wed, 22 September 2021 13:11
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Wed, 22 September 2021 14:53
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Wed, 22 September 2021 22:53
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Thu, 23 September 2021 02:03
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Thu, 23 September 2021 07:59
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Sun, 02 January 2022 20:31
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Mon, 03 January 2022 09:40
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Tue, 11 January 2022 21:17
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Fri, 14 January 2022 18:25
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Sat, 15 January 2022 20:36
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Sun, 16 January 2022 10:56
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Thu, 27 January 2022 22:21
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Fri, 28 January 2022 12:13
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Fri, 28 January 2022 17:38
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Sat, 29 January 2022 10:41
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Sat, 29 January 2022 20:33
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Mon, 31 January 2022 01:43
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Mon, 31 January 2022 09:21
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Mon, 31 January 2022 14:08
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Mon, 31 January 2022 15:00
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Mon, 31 January 2022 16:05
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Fri, 04 February 2022 20:15
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Sat, 05 February 2022 10:43
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Sun, 06 February 2022 20:07
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Mon, 07 February 2022 10:25
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Fri, 06 May 2022 14:55
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Fri, 06 May 2022 15:23
		Re: 4Pi - alternate compression driver mounting? By: Barryso on Sat, 07 May 2022 08:26
		Re: 4Pi - alternate compression driver mounting? By: Rusty on Mon, 09 May 2022 05:58
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Wed, 11 May 2022 15:11

Previous Topic:	room and amp questions
Next Topic:	MDO - Instead of Plywood

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Dec 21 07:49:26 CST 2024