Home » Sponsored » Pi Speakers » Aztec Monet Cabinets
Re: Aztec Monet Cabinets [message #94760 is a reply to message #93256] Sun, 07 November 2021 14:26 Go to previous messageGo to previous message
grindstone is currently offline  grindstone
Messages: 46
Registered: May 2010
Baron
Alternatives (aka poking with a stick and a smile):

- Those cabinets have never been any smaller and you wouldn't be creating the first standing waves inside them. Ever ride in a very old restored car (but it's Restored!)? https://www.merriam-webster.com/thesaurus/charm
- Just run the 15's LF to maybe 100Hz and put them under your ewaves again--presto--3-way that's within 1/4 wavelength at cross
- Cover all the holes but the 8 and put a Betsy in there (which Paul was too classy to mention) and absorb coherence for a while during pondering and learning Vituix.
- Blow-out the baffle, stick the woofer 1/3 from one end and the port 1/5 from the other end and do whatever you want that fits. It won't be optimal, but you wont get into trouble if you stick one diagonal R-19 batt in there pasted down.
- List them for a good speaker-holic home on AK or somewhere & get subs to run w/your ewaves

OK -- now quickly notice your own reactions to those options -- there is your answer Smile

PS IMO, Valencia's "ain't all that" but they do sound "big"...and still don't have low-bass...or highs IMO Smile Was this too many IMO's?
PPS Seriously, any of us with a conscience about stewardship have felt your pain. This is why they stare at you. Robert Pirsig wrote of this in a book that wasn't about motorcycles:

"The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed."
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: long wall setup
Next Topic: 8Pi Midhorn fabrication
Goto Forum:
  


Current Time: Mon Nov 25 19:03:53 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest