AudioRoundTable.com: Thermionic Emissions » is ok to put a tube PRE in front of SS amp?

Home » Audio » Thermionic Emissions » is ok to put a tube PRE in front of SS amp?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Yes, No, Maybe.... [message #9471 is a reply to message #9469]

Thu, 29 December 2005 20:42

PakProtector
Messages: 935
Registered: May 2009

Illuminati (2nd Degree)

I'll second John's recomendation. However, the turn-on voltage transient is fairly well documented with that design and its predecessors. I'll go one last step further and suggesting a call to the tech support of your SS amp maker and see if a short duration spike 40-60V high would be any threat.

and then there is the sonic side to the topic. I suggest you'll like a good tube pre. tubes properly done are(so far) unbeatable in my experience.
cheers,
Douglas

Report message to a moderator

[Message index]

		is ok to put a tube PRE in front of SS amp? By: paba on Tue, 27 December 2005 20:53
		Yes, No, Maybe.... By: Old Brown Eyes on Wed, 28 December 2005 05:32
		Re: Yes, No, Maybe.... By: paba on Wed, 28 December 2005 07:00
		Re: Yes, No, Maybe.... By: 2wo on Wed, 28 December 2005 16:14
		Re: Yes, No, Maybe.... By: PakProtector on Thu, 29 December 2005 20:42
		There is a simple solution to the problem By: Old Brown Eyes on Fri, 30 December 2005 06:36
		Re: There is a simple solution to the problem By: PakProtector on Fri, 30 December 2005 07:07
		It may also affect power-down too By: GarMan on Thu, 05 January 2006 11:41
		Power up, down sequence By: Shane on Sat, 07 January 2006 22:10

Previous Topic:	NOS Tubes Picture Library to ID tubes
Next Topic:	New tungsols from SRS tubes and hickock results

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Nov 24 02:34:06 CST 2024