AudioRoundTable.com: Thermionic Emissions » Douglas, Damir, I did some more work on the 300bPP amps

Home » Audio » Thermionic Emissions » Douglas, Damir, I did some more work on the 300bPP amps

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 300bPP amps [message #9420 is a reply to message #9419]

Sun, 18 December 2005 15:32

Tre'
Messages: 34
Registered: May 2009

Baron

OK, I was able to raise the B+ for the driver tubes to 386VDC. Having not taken any measurements before hand, I can only tell you how it sounds. It sounds like there is maybe more headroom. I will bypasss the output cathode resistors when I get some appropriate caps.

Thanks....Tre'

Report message to a moderator

[Message index]

		Douglas, Damir, I did some more work on the 300bPP amps By: Tre' on Sat, 17 December 2005 13:32
		Re: Douglas, Damir, I did some more work on the 300bPP amps By: Damir on Sat, 17 December 2005 14:16
		Re: Douglas, Damir, I did some more work on the 300bPP amps By: Tre' on Sat, 17 December 2005 15:20
		300bPP amps By: PakProtector on Sat, 17 December 2005 17:30
		Re: 300bPP amps By: Tre' on Sat, 17 December 2005 19:48
		Re: 300bPP amps By: Damir on Sun, 18 December 2005 10:31
		Re: 300bPP amps By: Tre' on Sun, 18 December 2005 12:51
		Re: 300bPP amps By: Damir on Sun, 18 December 2005 14:45
		Re: 300bPP amps By: Tre' on Sun, 18 December 2005 15:32
		What would happen if....... By: Tre' on Sun, 18 December 2005 19:38
		Re: What would happen if....... By: Damir on Mon, 19 December 2005 05:54
		Re: 300bPP amps By: PakProtector on Sun, 18 December 2005 20:06
		Re: 300bPP amps By: Tre' on Sun, 18 December 2005 23:10
		typeO By: Tre' on Sun, 18 December 2005 23:18
		Re: typeO By: PakProtector on Tue, 03 January 2006 19:21
		Sweet! By: Wayne Parham on Mon, 19 December 2005 08:48
		Last picture By: Tre' on Tue, 20 December 2005 16:50
		Wrong URL, Sorry By: Tre' on Tue, 20 December 2005 16:54
		Looks great! By: Wayne Parham on Wed, 21 December 2005 08:52

Previous Topic:	Pinging MQracing
Next Topic:	NOS Tubes Picture Library to ID tubes

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 13:52:16 CST 2024