AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » PI 4 Upgrades

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: PI 4 Upgrades [message #93591 is a reply to message #93590]

Thu, 22 April 2021 15:15

Wayne Parham
Messages: 18752
Registered: January 2001

Illuminati (33rd Degree)

No, they're not. You'll have to drill the H290C. When I had the mold made for the H290C, I wanted the extra thickness near the throat for strength, so I chose to omit the inner three mounting holes. The two-hole arrangement works for the B&C, Eminence and TAD drivers, as well as many others. But sadly, that makes the 2426 a little more work.

Report message to a moderator

[Message index]

		PI 4 Upgrades By: docjrev on Wed, 21 April 2021 14:43
		Re: PI 4 Upgrades By: Wayne Parham on Wed, 21 April 2021 17:55
		Re: PI 4 Upgrades By: docjrev on Thu, 22 April 2021 10:34
		Re: PI 4 Upgrades By: Wayne Parham on Thu, 22 April 2021 11:57
		Re: PI 4 Upgrades By: docjrev on Thu, 22 April 2021 14:44
		Re: PI 4 Upgrades By: Wayne Parham on Thu, 22 April 2021 15:15
		Re: PI 4 Upgrades By: docjrev on Fri, 23 April 2021 12:36
		Re: PI 4 Upgrades By: Jetpump on Sun, 02 May 2021 13:04
		Re: PI 4 Upgrades By: Wayne Parham on Sun, 02 May 2021 14:31

Previous Topic:	Pi2 Speakers
Next Topic:	2pi 1pi crossover

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Aug 27 07:05:08 CDT 2024