AudioRoundTable.com: Pi Speakers » Crossover inductor for 2 Pi

Home » Sponsored » Pi Speakers » Crossover inductor for 2 Pi (Inductor & other components)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Crossover inductor for 2 Pi [message #93319 is a reply to message #93317]

Sat, 13 March 2021 18:06

ade1
Messages: 3
Registered: March 2021

Esquire

Hi Wayne,
I've looked for 16 ohm Mills resistors, they don't seem to do a 10 w, just 5w or 12w. Shall I go for the 12 Watt?

Alsofound the Xicon, they are only £0.70, each compared to the £5 Mills. I've read good things about the Mills and don't mind paying the extra. It's peanuts compared to some esoteric brands at £25+. Also, it seems a lot of companies don't make 16 ohm resistors, 15 & 18 ohms, but not 16. Does 1 Ohm make a much of a difference?

And the AWG18 Air core inductors range from 0.016mH to 18mH. Which is correct for the xo?

Thanks
Ade

Report message to a moderator

[Message index]

		Crossover inductor for 2 Pi By: ade1 on Fri, 12 March 2021 15:32
		Re: Crossover inductor for 2 Pi By: Wayne Parham on Fri, 12 March 2021 16:37
		Re: Crossover inductor for 2 Pi By: ade1 on Fri, 12 March 2021 17:51
		Re: Crossover inductor for 2 Pi By: Wayne Parham on Sat, 13 March 2021 08:11
		Re: Crossover inductor for 2 Pi By: ade1 on Sat, 13 March 2021 18:06
		Re: Crossover inductor for 2 Pi By: Wayne Parham on Sat, 13 March 2021 19:55

Previous Topic:	H290 horn. Old vs new
Next Topic:	JBL vs Eminence 15" bass drivers

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Nov 24 19:01:10 CST 2024