AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Flanking subs

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Flanking subs [message #91333 is a reply to message #91332]

Tue, 14 January 2020 18:39

Wayne Parham
Messages: 18726
Registered: January 2001

Illuminati (33rd Degree)

All three subs are multisubs. The two nearest the mains are flanking subs and the distant one is a distributed multisub.

Check that your plate amp DSP can support 100Hz second-order and 50Hz fourth-order Butterworth slopes. I'm sure it does, but check it out before buying. Setup the flanking subs with 100Hz second-order and the distant subs with 50Hz fourth-order.

Multisubs and flanking subs

Report message to a moderator

[Message index]

		Flanking subs By: jon anderson on Tue, 14 January 2020 15:20
		Re: Flanking subs By: Wayne Parham on Tue, 14 January 2020 17:40
		Re: Flanking subs By: jon anderson on Tue, 14 January 2020 18:02
		Re: Flanking subs By: jon anderson on Tue, 14 January 2020 18:04
		Re: Flanking subs By: Wayne Parham on Tue, 14 January 2020 18:39
		Re: Flanking subs By: jon anderson on Tue, 14 January 2020 19:22

Previous Topic:	2 Pi tower build questions
Next Topic:	4PI Plans Request

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Jul 15 11:47:53 CDT 2024