AudioRoundTable.com: Pi Speakers » 4pi build and questions

Home » Sponsored » Pi Speakers » 4pi build and questions

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 4pi build and questions [message #89223 is a reply to message #89212]

Thu, 15 November 2018 08:13

n-a
Messages: 5
Registered: November 2018

Esquire

Ok, thank you so far. So to confirm this; double the coils (woofer), half the capacitors (woofer, but not C4), double the R3 to 16ohm, compensate -3db with the resistors in HF schematics. Can you confirm my math in the earlier post? Does it show?

My intention is to take measurements when the speakers are ready to confirm that is working as designed. But I understand that it should be build with the right parts. All the parts that I have are new and I thought that I have the 2226H, but what I received was 2226J. And the private seller didn't have the 2226H left anymore so I will try to make these work. Smile

I will send some pictures when the building starts.
Br,
n-a

Report message to a moderator

[Message index]

		4pi build and questions By: n-a on Wed, 14 November 2018 02:31
		Re: 4pi build and questions By: Wayne Parham on Wed, 14 November 2018 16:36
		Re: 4pi build and questions By: n-a on Thu, 15 November 2018 08:13
		Re: 4pi build and questions By: Wayne Parham on Thu, 15 November 2018 08:47
		Re: 4pi build and questions By: n-a on Fri, 16 November 2018 01:53
		Re: 4pi build and questions By: n-a on Fri, 16 November 2018 02:04
		Re: 4pi build and questions By: Wayne Parham on Fri, 16 November 2018 10:44
		Re: 4pi build and questions By: n-a on Wed, 05 December 2018 08:33

Previous Topic:	Using JBL 2206 in 3Pi speakers
Next Topic:	Amp for 4pi speakers

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 22 16:22:16 CST 2024