AudioRoundTable.com: Thermionic Emissions

Home » Audio » Thermionic Emissions » amp input stage

Mon, 11 April 2005 21:49

Steve
Messages: 83
Registered: May 2009

Viscount

Yes, the input capacitance of the amp can be up to 100pf. Cables vary so much. I have seen them as low as 30pf/meter and as high as 475pf/meter.

I try to keep the ICs as low as possible as the tube's miller is pretty much set by the designer.

Hope this helps.
Steve

		amp input stage By: PakProtector on Sat, 09 April 2005 05:42
		Re: amp input stage By: Manualblock on Sat, 09 April 2005 06:49
		Re: amp input stage By: PakProtector on Sat, 09 April 2005 10:58
		Re: amp input stage By: Manualblock on Sat, 09 April 2005 11:31
		Re: amp input stage By: Wayne Parham on Sat, 09 April 2005 08:14
		Re: amp input stage By: Steve on Mon, 11 April 2005 21:49
		some test results... By: PakProtector on Sun, 17 April 2005 07:39
		Re: some test results... By: Steve on Wed, 01 June 2005 20:22

Previous Topic:	Cathode drive
Next Topic:	November 2005 Vacuum Tube Valley Southern California Audio Festival

Goto Forum:

] [

]

Current Time: Fri Nov 29 21:14:48 CST 2024